Chaise piétement chromé Brink - Chêne

The shell is made from form-pressed veneer with a core of beech veneer layers and an oak surface veneer, made from FSC™-certified (FSC-C028824) wood. The surface is finished with a water-based lacquer. The chair is available in non-upholstered, with seat upholstery, or with front upholstery. Upholstery pads for both the seat and front are removable.

The cantilever base is made from powder-coated or chromed bent steel tube, produced using a minimum of 25% post-industrial recycled steel. Glides are pre-mounted and can be used as either felt or plastic by simply flipping them.

The chair can be disassembled into main components (shell, base, upholstery pad, glides) to enable repair and renewal.

Seat Height : 46 cm
Seat Depth : 40 cmHauteur: 83.1 cm Largeur: 48 cm Profondeur: 54.7 cm

The shell and base should be cleaned with a cloth dampened with water. If needed, a mild detergent or dish soap may be used. Concentrated or abrasive cleaning agents should be avoided, as they may damage the surface. After cleaning, the surface should be dried with a soft, clean cloth.
For textile upholstery, stains should be gently dabbed with a lint-free cloth or sponge wrung in clean, warm water. If required, a mild solution of dish soap and water may be used, followed by clean water. For further care, it is recommended to consult the guidelines provided by the respective textile supplier, as cleaning methods may vary.

For imitation leather, the surface should be cleaned using lukewarm, pH-neutral soapy water and a soft cloth or brush. Solvents and general chemical cleaners should be avoided. Alcohol-based cleaners may be used if necessary. The surface should be finished with a damp cloth.
Leather is a natural material that develops character over time and should be maintained regularly. Refine Leather, Easy Leather, and Endure Leather should be dusted with a dry cloth and treated regularly using suitable leather care products. Allure and Grace Leather should only be vacuumed with a soft brush. Water, soap, and chemical cleaning agents should be avoided, as they may affect the surface finish.